LyzerKlin RCD

LyzerKlin RCD is a very good washing agent for cotton /viscose material dyed or printed with Reactive Colours. LyzerKlin RCD is useful in both batch washing processes such as washing on jigger / winch /kundi(open tank) and continuous washing processes such as washing on soaper with six compartments.

LYZERKLIN RCD ACTS VERY FAST

LyzerKlin RCD works even on soaper with six compartments, where time of contact of reactive printed material with washing liquor containing LyzerKlin RCD is hardly less than a minute. Under these conditions also it gives tint free, bright prints. Unprinted white portions in the print, remain dazzling white & unsoiled. LyzerKlin RCD acts to remove printing gums during washing. This produces prints with soft handle. It becomes easier to finish these fabrics and saves in the cost of softening agent.


PHYSICAL & CHEMICAL PROPERTIES OF LYZERKLIN RCD

1. White to straw yellow paste.
2. Typical refreshing odour, harmless in nature.
3. Non ionic and anionic blend.
4. pH of 10 % solution of LyzerKlin RCD is about 10.5 to 11.0
5. Dilutable with soft water to any extent, giving slightly milky emulsions. However; if only hard water is available, usage of Hexameta phosphate - 1gm/lit is recommended.

APPLICATION
As per normal industrial practice, dyeing of reactive colours is carried out on jiggers. After fixation is over, dyed goods are subjected to washing. Similarly printed goods after fixation by steaming or silicate padding, are subjected to washing either on winches or in kundis batch by batch. However: if the production is more, it is desirable to wash goods in continuous manner. This may be achieved by using either jumbo soaper or soaper with six compartments. The water consumption on jumbo type soapers is really prohibitive. Also the equipment costs are very high. LyzerKlin RCD provides the means to effectively wash these goods on ordinary soaper with six compartments. The method for washing of both dyed / printed goods is as follows:

RECOMMENDED WASHING PROCESS
FIRST STEP
1 st end on jig or Cold running water treatment
1 st wash on winch or This removes excess of free
1 st kundi treatment or colour, allows the printing
1 st compartment of soaper gum to swell, use 1 g/l of
Hexameta Phosphate(for hard water)

SECOND STEP
2 nd end on jigger
2 nd wash on winch ---- do -----
2 nd kundi treatment
2 nd compartment of soaper

THIRD STEP
3 rd end on jigger Hot water treatment with
3 rd wash on winch LyzerKlin RCD 3 g/l,
3 rd kundi wash preferably near boil.
3 rd compartment of soaper use 1 g/l Hexameta if req.

FOURTH STEP
4 th end on jigger Hot water treatment with
4 th wash on winch LyzerKlin RCD - 2 g/l,
4 th kundi wash Hexameta phosphate 0.5 g/l
4 th compartment of soaper if required.

FIFTH STEP
5 th end on jigger Hot water treatment, near to
5 th wash on winch boil no chemicals required.
5 th kundi wash
5 th compartment of soaper

SIXTH STEP
6 th end on jigger Cold wash, acetic acid 0.5
6 th wash on winch g/l if neutralization is
6 th kundi wash required.
6 th compartment of soaper


RAY DIAGRAM OF THE WASHING PROCESS
USING A SOAPER WITH SIX COMPARTMENTS:

COLD WASH COLD WASH WASH AT WASH AT HOT WASH COLD WASH
80-85oC. 80-85oC. With H-Ac
WITH L.RCD WITH L.RCD 1 GM/LIT
3 GM/LIT 2 GM/LIT

For batch processes on jigger/ winch change of water is required per step. For kundis / soaper first two tanks or compartments are always with running water. For tanks or soaper compartments under operation 3, 4, 5 & 6; half the water in each compartment is drained after washing of every one thousand meters of cloth. The same is replaced at adequate temperature and with equivalent amount of chemicals like LyzerKlin RCD and hexa meta phosphate. The water softening chemical is highly essential if silicate process is used for fixing the prints/dyeings.

The process indicated produces high quality goods, free from running colour, excellent brightness, unsoiled tint free prints that are soft to hand touch.

STORAGE: The product enjoys very good shelf life and warrants no particular storage conditions. However it is always advisable to have moderate conditions with the container being recapped tightly after use. Six months if stored below 30°c

Packing:
30 , 50 & 200 Kgs in Plastic Container.

Note:
According to our best knowledge and technical experiments, the above data is true and accurate. Regarding to variety of consumption procedures, it is recommended to evaluate the information before use.